Cisco Nx os 6.2(1.121)s0

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

A vulnerability in the rate limiter for Bidirectional Forwarding Detection (BFD) traffic of Cisco NX-OS Software for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause BFD traffic to be dropped on an affected device. This vulnerability is due to a logic error in the BFD rate limiter functionality. An attacker could exploit this vulnerability by sending a crafted stream of traffic through the device. A successful exploit could allow the attacker to cause BFD traffic to be dropped, resulting in BFD session flaps. BFD session flaps can cause route instability and dropped traffic, resulting in a denial of service (DoS) condition. This vulnerability applies to both IPv4 and IPv6 traffic.

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the Cisco NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability.

A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges, which may lead to complete system compromise. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection.

A vulnerability in the IPv6 traffic processing of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an unexpected restart of the netstack process on an affected device. The vulnerability is due to improper validation of IPv6 traffic sent through an affected device. An attacker could exploit this vulnerability by sending a malformed IPv6 packet through an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition while the netstack process restarts. A sustained attack could lead to a reboot of the device.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an adjacent, unauthenticated attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to the targeted device. A successful exploit may lead to a buffer overflow condition that could either cause a DoS condition or allow the attacker to execute arbitrary code with root privileges. Note: This vulnerability cannot be exploited by transit traffic through the device; the crafted packet must be targeted to a directly connected interface. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode if they are running a Cisco Nexus 9000 Series ACI Mode Switch Software release prior to 13.2(7f) or any 14.x release.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. NX-OS versions prior to 8.3(1) are affected. NX-OS versions prior to 8.3(1) are affected.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature used in an NX-OS CLI command in Cisco Nexus 3000 Series and 9000 Series Switches could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. Note: If the device has not been patched for the vulnerability previously disclosed in the Cisco Security Advisory cisco-sa-20190306-nxos-sig-verif, a successful exploit could allow the attacker to boot a malicious software image.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by loading an unsigned software patch on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.