Freebsd Freebsd 6.3 Release P10

The ctl_write_buffer and ctl_read_buffer functions allocated memory to be returned to userspace, without initializing it.

Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.

A malicious value of size in a structure of packed libnv can cause an integer overflow, leading to the allocation of a smaller buffer than required for the parsed data.

The function ctl_write_buffer incorrectly set a flag which resulted in a kernel Use-After-Free when a command finished processing.

Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.

The ctl_request_sense function could expose up to three bytes of the kernel heap to userspace.

Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.

Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of UMTX_OP_SHM can lead to decreasing the reference count of the object representing the mapping too many times, causing it to be freed too early.

A malicious code exercizing the UMTX_SHM_DESTROY sub-request in parallel can panic the kernel or enable further Use-After-Free attacks, potentially including code execution or Capsicum sandbox escape.

The ctl_report_supported_opcodes function did not sufficiently validate a field provided by userspace, allowing an arbitrary write to a limited amount of kernel help memory.

Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.

An insufficient boundary validation in the USB code could lead to an out-of-bounds write on the heap, with data controlled by the caller.

A malicious, privileged software running in a guest VM can exploit the vulnerability to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process.

A signal handler in sshd(8) may call a logging function that is not async-signal-safe. The signal handler is invoked when a client does not authenticate within the LoginGraceTime seconds (120 by default). This signal handler executes in the context of the sshd(8)'s privileged code, which is not sandboxed and runs with full root privileges.

This issue is another instance of the problem in CVE-2024-6387 addressed by FreeBSD-SA-24:04.openssh. The faulty code in this case is from the integration of blacklistd in OpenSSH in FreeBSD.

As a result of calling functions that are not async-signal-safe in the privileged sshd(8) context, a race condition exists that a determined attacker may be able to exploit to allow an unauthenticated remote code execution as root.

A logic bug in the code which disables kernel tracing for setuid programs meant that tracing was not disabled when it should have, allowing unprivileged users to trace and inspect the behavior of setuid programs.

The bug may be used by an unprivileged user to read the contents of files to which they would not otherwise have access, such as the local password database.

When mounting a remote filesystem using NFS, the kernel did not sanitize remotely provided filenames for the path separator character, "/". This allows readdir(3) and related functions to return filesystem entries with names containing additional path components.

The lack of validation described above gives rise to a confused deputy problem. For example, a program copying files from an NFS mount could be tricked into copying from outside the intended source directory, and/or to a location outside the intended destination directory.

The jail(2) system call has not limited a visiblity of allocated TTYs (the kern.ttys sysctl). This gives rise to an information leak about processes outside the current jail.

Attacker can get information about TTYs allocated on the host or in other jails. Effectively, the information printed by "pstat -t" may be leaked.

`bhyveload -h ` may be used to grant loader access to the directory tree on the host. Affected versions of bhyveload(8) do not make any attempt to restrict loader's access to , allowing the loader to read any file the host user has access to. In the bhyveload(8) model, the host supplies a userboot.so to boot with, but the loader scripts generally come from the guest image. A maliciously crafted script could be used to exfiltrate sensitive data from the host accessible to the user running bhyhveload(8), which is often the system root.

A particular case of memory sharing is mishandled in the virtual memory system. This is very similar to SA-21:08.vm, but with a different root cause.

An unprivileged local user process can maintain a mapping of a page after it is freed, allowing that process to read private data belonging to other processes or the kernel.

When dumping core and saving process information, proc_getargv() might return an sbuf which have a sbuf_len() of 0 or -1, which is not properly handled.

An out-of-bound read can happen when user constructs a specially crafted ps_string, which in turn can cause the kernel to crash.

The 802.11 beacon handling routine failed to validate the length of an IEEE 802.11s Mesh ID before copying it to a heap-allocated buffer.

While a FreeBSD Wi-Fi client is in scanning mode (i.e., not associated with a SSID) a malicious beacon frame may overwrite kernel memory, leading to remote code execution.

The e1000 network adapters permit a variety of modifications to an Ethernet packet when it is being transmitted. These include the insertion of IP and TCP checksums, insertion of an Ethernet VLAN header, and TCP segmentation offload ("TSO"). The e1000 device model uses an on-stack buffer to generate the modified packet header when simulating these modifications on transmitted packets.

When checksum offload is requested for a transmitted packet, the e1000 device model used a guest-provided value to specify the checksum offset in the on-stack buffer. The offset was not validated for certain packet types.

A misbehaving bhyve guest could overwrite memory in the bhyve process on the host, possibly leading to code execution in the host context.

The bhyve process runs in a Capsicum sandbox, which (depending on the FreeBSD version and bhyve configuration) limits the impact of exploiting this issue.

Handlers for *_CFG_PAGE read / write ioctls in the mpr, mps, and mpt drivers allocated a buffer of a caller-specified size, but copied to it a fixed size header. Other heap content would be overwritten if the specified size was too small.

Users with access to the mpr, mps or mpt device node may overwrite heap data, potentially resulting in privilege escalation. Note that the device node is only accessible to root and members of the operator group.

A user-provided integer option was passed to nmreq_copyin() without checking if it would overflow. This insufficient bounds checking could lead to kernel memory corruption.

On systems configured to include netmap in their devfs_ruleset, a privileged process running in a jail can affect the host environment.

The total size of the user-provided nmreq to nmreq_copyin() was first computed and then trusted during the copyin. This time-of-check to time-of-use bug could lead to kernel memory corruption.

On systems configured to include netmap in their devfs_ruleset, a privileged process running in a jail can affect the host environment.

sendmail through 8.17.2 allows SMTP smuggling in certain configurations. Remote attackers can use a published exploitation technique to inject e-mail messages with a spoofed MAIL FROM address, allowing bypass of an SPF protection mechanism. This occurs because sendmail supports . but some other popular e-mail servers do not. This is resolved in 8.18 and later versions with 'o' in srv_features.

The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust.

In versions of FreeBSD 13-RELEASE before 13-RELEASE-p5, under certain circumstances the cap_net libcasper(3) service incorrectly validates that updated constraints are strictly subsets of the active constraints.  When only a list of resolvable domain names was specified without setting any other limitations, an application could submit a new list of domains including include entries not previously listed.  This could permit the application to resolve domain names that were previously restricted.

In versions of FreeBSD 12.4-RELEASE prior to 12.4-RELEASE-p7 and FreeBSD 13.2-RELEASE prior to 13.2-RELEASE-p5 the __sflush() stdio function in libc does not correctly update FILE objects' write space members for write-buffered streams when the write(2) system call returns an error. Â Depending on the nature of an application that calls libc's stdio functions and the presence of errors returned from the write(2) system call (or an overridden stdio write routine) a heap buffer overflow may occur. Such overflows may lead to data corruption or the execution of arbitrary code at the privilege level of the calling program.

On an msdosfs filesystem, the 'truncate' or 'ftruncate' system calls under certain circumstances populate the additional space in the file with unallocated data from the underlying disk device, rather than zero bytes.

This may permit a user with write access to files on a msdosfs filesystem to read unintended data (e.g. from a previously deleted file).

In pf packet processing with a 'scrub fragment reassemble' rule, a packet containing multiple IPv6 fragment headers would be reassembled, and then immediately processed. That is, a packet with multiple fragment extension headers would not be recognized as the correct ultimate payload. Instead a packet with multiple IPv6 fragment headers would unexpectedly be interpreted as a fragmented packet, rather than as whatever the real payload is.

As a result, IPv6 fragments may bypass pf firewall rules written on the assumption all fragments have been reassembled and, as a result, be forwarded or processed by the host.