Git scm Git 0.14.0

Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, a specially crafted `.gitmodules` file with submodule URLs that are longer than 1024 characters can used to exploit a bug in `config.c::git_config_copy_or_rename_section_in_file()`. This bug can be used to inject arbitrary configuration into a user's `$GIT_DIR/config` when attempting to remove the configuration section associated with that submodule. When the attacker injects configuration values which specify executables to run (such as `core.pager`, `core.editor`, `core.sshCommand`, etc.) this can lead to a remote code execution. A fix A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid running `git submodule deinit` on untrusted repositories or without prior inspection of any submodule sections in `$GIT_DIR/config`.

Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, by feeding specially crafted input to `git apply --reject`, a path outside the working tree can be overwritten with partially controlled contents (corresponding to the rejected hunk(s) from the given patch). A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid using `git apply` with `--reject` when applying patches from an untrusted source. Use `git apply --stat` to inspect a patch before applying; avoid applying one that create a conflict where a link corresponding to the `*.rej` file exists.

Git, a revision control system, is vulnerable to path traversal prior to versions 2.39.2, 2.38.4, 2.37.6, 2.36.5, 2.35.7, 2.34.7, 2.33.7, 2.32.6, 2.31.7, and 2.30.8. By feeding a crafted input to `git apply`, a path outside the working tree can be overwritten as the user who is running `git apply`. A fix has been prepared and will appear in v2.39.2, v2.38.4, v2.37.6, v2.36.5, v2.35.7, v2.34.7, v2.33.7, v2.32.6, v2.31.7, and v2.30.8. As a workaround, use `git apply --stat` to inspect a patch before applying; avoid applying one that creates a symbolic link and then creates a file beyond the symbolic link.

Git is a revision control system. Using a specially-crafted repository, Git prior to versions 2.39.2, 2.38.4, 2.37.6, 2.36.5, 2.35.7, 2.34.7, 2.33.7, 2.32.6, 2.31.7, and 2.30.8 can be tricked into using its local clone optimization even when using a non-local transport. Though Git will abort local clones whose source `$GIT_DIR/objects` directory contains symbolic links, the `objects` directory itself may still be a symbolic link. These two may be combined to include arbitrary files based on known paths on the victim's filesystem within the malicious repository's working copy, allowing for data exfiltration in a similar manner as CVE-2022-39253.

A fix has been prepared and will appear in v2.39.2 v2.38.4 v2.37.6 v2.36.5 v2.35.7 v2.34.7 v2.33.7 v2.32.6, v2.31.7 and v2.30.8. If upgrading is impractical, two short-term workarounds are available. Avoid cloning repositories from untrusted sources with `--recurse-submodules`. Instead, consider cloning repositories without recursively cloning their submodules, and instead run `git submodule update` at each layer. Before doing so, inspect each new `.gitmodules` file to ensure that it does not contain suspicious module URLs.

Git GUI is a convenient graphical tool that comes with Git for Windows. Its target audience is users who are uncomfortable with using Git on the command-line. Git GUI has a function to clone repositories. Immediately after the local clone is available, Git GUI will automatically post-process it, among other things running a spell checker called `aspell.exe` if it was found. Git GUI is implemented as a Tcl/Tk script. Due to the unfortunate design of Tcl on Windows, the search path when looking for an executable _always includes the current directory_. Therefore, malicious repositories can ship with an `aspell.exe` in their top-level directory which is executed by Git GUI without giving the user a chance to inspect it first, i.e. running untrusted code. This issue has been addressed in version 2.39.1. Users are advised to upgrade. Users unable to upgrade should avoid using Git GUI for cloning. If that is not a viable option, at least avoid cloning from untrusted sources.

Git is distributed revision control system. `git log` can display commits in an arbitrary format using its `--format` specifiers. This functionality is also exposed to `git archive` via the `export-subst` gitattribute. When processing the padding operators, there is a integer overflow in `pretty.c::format_and_pad_commit()` where a `size_t` is stored improperly as an `int`, and then added as an offset to a `memcpy()`. This overflow can be triggered directly by a user running a command which invokes the commit formatting machinery (e.g., `git log --format=...`). It may also be triggered indirectly through git archive via the export-subst mechanism, which expands format specifiers inside of files within the repository during a git archive. This integer overflow can result in arbitrary heap writes, which may result in arbitrary code execution. The problem has been patched in the versions published on 2023-01-17, going back to v2.30.7. Users are advised to upgrade. Users who are unable to upgrade should disable `git archive` in untrusted repositories. If you expose git archive via `git daemon`, disable it by running `git config --global daemon.uploadArch false`.

Git is distributed revision control system. gitattributes are a mechanism to allow defining attributes for paths. These attributes can be defined by adding a `.gitattributes` file to the repository, which contains a set of file patterns and the attributes that should be set for paths matching this pattern. When parsing gitattributes, multiple integer overflows can occur when there is a huge number of path patterns, a huge number of attributes for a single pattern, or when the declared attribute names are huge. These overflows can be triggered via a crafted `.gitattributes` file that may be part of the commit history. Git silently splits lines longer than 2KB when parsing gitattributes from a file, but not when parsing them from the index. Consequentially, the failure mode depends on whether the file exists in the working tree, the index or both. This integer overflow can result in arbitrary heap reads and writes, which may result in remote code execution. The problem has been patched in the versions published on 2023-01-17, going back to v2.30.7. Users are advised to upgrade. There are no known workarounds for this issue.

Git is an open source, scalable, distributed revision control system. `git shell` is a restricted login shell that can be used to implement Git's push/pull functionality via SSH. In versions prior to 2.30.6, 2.31.5, 2.32.4, 2.33.5, 2.34.5, 2.35.5, 2.36.3, and 2.37.4, the function that splits the command arguments into an array improperly uses an `int` to represent the number of entries in the array, allowing a malicious actor to intentionally overflow the return value, leading to arbitrary heap writes. Because the resulting array is then passed to `execv()`, it is possible to leverage this attack to gain remote code execution on a victim machine. Note that a victim must first allow access to `git shell` as a login shell in order to be vulnerable to this attack. This problem is patched in versions 2.30.6, 2.31.5, 2.32.4, 2.33.5, 2.34.5, 2.35.5, 2.36.3, and 2.37.4 and users are advised to upgrade to the latest version. Disabling `git shell` access via remote logins is a viable short-term workaround.

Git is an open source, scalable, distributed revision control system. Versions prior to 2.30.6, 2.31.5, 2.32.4, 2.33.5, 2.34.5, 2.35.5, 2.36.3, and 2.37.4 are subject to exposure of sensitive information to a malicious actor. When performing a local clone (where the source and target of the clone are on the same volume), Git copies the contents of the source's `$GIT_DIR/objects` directory into the destination by either creating hardlinks to the source contents, or copying them (if hardlinks are disabled via `--no-hardlinks`). A malicious actor could convince a victim to clone a repository with a symbolic link pointing at sensitive information on the victim's machine. This can be done either by having the victim clone a malicious repository on the same machine, or having them clone a malicious repository embedded as a bare repository via a submodule from any source, provided they clone with the `--recurse-submodules` option. Git does not create symbolic links in the `$GIT_DIR/objects` directory. The problem has been patched in the versions published on 2022-10-18, and backported to v2.30.x. Potential workarounds: Avoid cloning untrusted repositories using the `--local` optimization when on a shared machine, either by passing the `--no-local` option to `git clone` or cloning from a URL that uses the `file://` scheme. Alternatively, avoid cloning repositories from untrusted sources with `--recurse-submodules` or run `git config --global protocol.file.allow user`.

Git is a distributed revision control system. Git prior to versions 2.37.1, 2.36.2, 2.35.4, 2.34.4, 2.33.4, 2.32.3, 2.31.4, and 2.30.5, is vulnerable to privilege escalation in all platforms. An unsuspecting user could still be affected by the issue reported in CVE-2022-24765, for example when navigating as root into a shared tmp directory that is owned by them, but where an attacker could create a git repository. Versions 2.37.1, 2.36.2, 2.35.4, 2.34.4, 2.33.4, 2.32.3, 2.31.4, and 2.30.5 contain a patch for this issue. The simplest way to avoid being affected by the exploit described in the example is to avoid running git as root (or an Administrator in Windows), and if needed to reduce its use to a minimum. While a generic workaround is not possible, a system could be hardened from the exploit described in the example by removing any such repository if it exists already and creating one as root to block any future attacks.

Git for Windows is a fork of Git containing Windows-specific patches. This vulnerability affects users working on multi-user machines, where untrusted parties have write access to the same hard disk. Those untrusted parties could create the folder `C:\.git`, which would be picked up by Git operations run supposedly outside a repository while searching for a Git directory. Git would then respect any config in said Git directory. Git Bash users who set `GIT_PS1_SHOWDIRTYSTATE` are vulnerable as well. Users who installed posh-gitare vulnerable simply by starting a PowerShell. Users of IDEs such as Visual Studio are vulnerable: simply creating a new project would already read and respect the config specified in `C:\.git\config`. Users of the Microsoft fork of Git are vulnerable simply by starting a Git Bash. The problem has been patched in Git for Windows v2.35.2. Users unable to upgrade may create the folder `.git` on all drives where Git commands are run, and remove read/write access from those folders as a workaround. Alternatively, define or extend `GIT_CEILING_DIRECTORIES` to cover the _parent_ directory of the user profile, e.g. `C:\Users` if the user profile is located in `C:\Users\my-user-name`.

The --mirror documentation for Git through 2.35.1 does not mention the availability of deleted content, aka the "GitBleed" issue. This could present a security risk if information-disclosure auditing processes rely on a clone operation without the --mirror option. Note: This has been disputed by multiple 3rd parties who believe this is an intended feature of the git binary and does not pose a security risk.

git_connect_git in connect.c in Git before 2.30.1 allows a repository path to contain a newline character, which may result in unexpected cross-protocol requests, as demonstrated by the git://localhost:1234/%0d%0a%0d%0aGET%20/%20HTTP/1.1 substring.

Git is an open-source distributed revision control system. In affected versions of Git a specially crafted repository that contains symbolic links as well as files using a clean/smudge filter such as Git LFS, may cause just-checked out script to be executed while cloning onto a case-insensitive file system such as NTFS, HFS+ or APFS (i.e. the default file systems on Windows and macOS). Note that clean/smudge filters have to be configured for that. Git for Windows configures Git LFS by default, and is therefore vulnerable. The problem has been patched in the versions published on Tuesday, March 9th, 2021. As a workaound, if symbolic link support is disabled in Git (e.g. via `git config --global core.symlinks false`), the described attack won't work. Likewise, if no clean/smudge filters such as Git LFS are configured globally (i.e. _before_ cloning), the attack is foiled. As always, it is best to avoid cloning repositories from untrusted sources. The earliest impacted version is 2.14.2. The fix versions are: 2.30.1, 2.29.3, 2.28.1, 2.27.1, 2.26.3, 2.25.5, 2.24.4, 2.23.4, 2.22.5, 2.21.4, 2.20.5, 2.19.6, 2.18.5, 2.17.62.17.6.

Affected versions of Git have a vulnerability whereby Git can be tricked into sending private credentials to a host controlled by an attacker. This bug is similar to CVE-2020-5260(GHSA-qm7j-c969-7j4q). The fix for that bug still left the door open for an exploit where _some_ credential is leaked (but the attacker cannot control which one). Git uses external "credential helper" programs to store and retrieve passwords or other credentials from secure storage provided by the operating system. Specially-crafted URLs that are considered illegal as of the recently published Git versions can cause Git to send a "blank" pattern to helpers, missing hostname and protocol fields. Many helpers will interpret this as matching _any_ URL, and will return some unspecified stored password, leaking the password to an attacker's server. The vulnerability can be triggered by feeding a malicious URL to `git clone`. However, the affected URLs look rather suspicious; the likely vector would be through systems which automatically clone URLs not visible to the user, such as Git submodules, or package systems built around Git. The root of the problem is in Git itself, which should not be feeding blank input to helpers. However, the ability to exploit the vulnerability in practice depends on which helpers are in use. Credential helpers which are known to trigger the vulnerability: - Git's "store" helper - Git's "cache" helper - the "osxkeychain" helper that ships in Git's "contrib" directory Credential helpers which are known to be safe even with vulnerable versions of Git: - Git Credential Manager for Windows Any helper not in this list should be assumed to trigger the vulnerability.

Affected versions of Git have a vulnerability whereby Git can be tricked into sending private credentials to a host controlled by an attacker. Git uses external "credential helper" programs to store and retrieve passwords or other credentials from secure storage provided by the operating system. Specially-crafted URLs that contain an encoded newline can inject unintended values into the credential helper protocol stream, causing the credential helper to retrieve the password for one server (e.g., good.example.com) for an HTTP request being made to another server (e.g., evil.example.com), resulting in credentials for the former being sent to the latter. There are no restrictions on the relationship between the two, meaning that an attacker can craft a URL that will present stored credentials for any host to a host of their choosing. The vulnerability can be triggered by feeding a malicious URL to git clone. However, the affected URLs look rather suspicious; the likely vector would be through systems which automatically clone URLs not visible to the user, such as Git submodules, or package systems built around Git. The problem has been patched in the versions published on April 14th, 2020, going back to v2.17.x. Anyone wishing to backport the change further can do so by applying commit 9a6bbee (the full release includes extra checks for git fsck, but that commit is sufficient to protect clients against the vulnerability). The patched versions are: 2.17.4, 2.18.3, 2.19.4, 2.20.3, 2.21.2, 2.22.3, 2.23.2, 2.24.2, 2.25.3, 2.26.1.

Git before 1.8.5.6, 1.9.x before 1.9.5, 2.0.x before 2.0.5, 2.1.x before 2.1.4, and 2.2.x before 2.2.1 on Windows and OS X; Mercurial before 3.2.3 on Windows and OS X; Apple Xcode before 6.2 beta 3; mine all versions before 08-12-2014; libgit2 all versions up to 0.21.2; Egit all versions before 08-12-2014; and JGit all versions before 08-12-2014 allow remote Git servers to execute arbitrary commands via a tree containing a crafted .git/config file with (1) an ignorable Unicode codepoint, (2) a git~1/config representation, or (3) mixed case that is improperly handled on a case-insensitive filesystem.

An issue was found in Git before v2.24.1, v2.23.1, v2.22.2, v2.21.1, v2.20.2, v2.19.3, v2.18.2, v2.17.3, v2.16.6, v2.15.4, and v2.14.6. When running Git in the Windows Subsystem for Linux (also known as "WSL") while accessing a working directory on a regular Windows drive, none of the NTFS protections were active.

An issue was found in Git before v2.24.1, v2.23.1, v2.22.2, v2.21.1, v2.20.2, v2.19.3, v2.18.2, v2.17.3, v2.16.6, v2.15.4, and v2.14.6. The --export-marks option of git fast-import is exposed also via the in-stream command feature export-marks=... and it allows overwriting arbitrary paths.

An issue was found in Git before v2.24.1, v2.23.1, v2.22.2, v2.21.1, v2.20.2, v2.19.3, v2.18.2, v2.17.3, v2.16.6, v2.15.4, and v2.14.6. Recursive clones are currently affected by a vulnerability that is caused by too-lax validation of submodule names, allowing very targeted attacks via remote code execution in recursive clones.

Arbitrary command execution is possible in Git before 2.20.2, 2.21.x before 2.21.1, 2.22.x before 2.22.2, 2.23.x before 2.23.1, and 2.24.x before 2.24.1 because a "git submodule update" operation can run commands found in the .gitmodules file of a malicious repository.

Git before 2.19.2 on Linux and UNIX executes commands from the current working directory (as if '.' were at the end of $PATH) in certain cases involving the run_command() API and run-command.c, because there was a dangerous change from execvp to execv during 2017.

Git before 2.14.5, 2.15.x before 2.15.3, 2.16.x before 2.16.5, 2.17.x before 2.17.2, 2.18.x before 2.18.1, and 2.19.x before 2.19.1 allows remote code execution during processing of a recursive "git clone" of a superproject if a .gitmodules file has a URL field beginning with a '-' character.

In Git before 2.13.7, 2.14.x before 2.14.4, 2.15.x before 2.15.2, 2.16.x before 2.16.4, and 2.17.x before 2.17.1, remote code execution can occur. With a crafted .gitmodules file, a malicious project can execute an arbitrary script on a machine that runs "git clone --recurse-submodules" because submodule "names" are obtained from this file, and then appended to $GIT_DIR/modules, leading to directory traversal with "../" in a name. Finally, post-checkout hooks from a submodule are executed, bypassing the intended design in which hooks are not obtained from a remote server.

In Git before 2.13.7, 2.14.x before 2.14.4, 2.15.x before 2.15.2, 2.16.x before 2.16.4, and 2.17.x before 2.17.1, code to sanity-check pathnames on NTFS can result in reading out-of-bounds memory.