Juniper Junos 4.3

When user-defined ARP Policer is configured and applied on one or more Aggregated Ethernet (AE) interface units, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability between the Device Control Daemon (DCD) and firewall process (dfwd) daemons of Juniper Networks Junos OS allows an attacker to bypass the user-defined ARP Policer. In this particular case the User ARP policer is replaced with default ARP policer. To review the desired ARP Policers and actual state one can run the command "show interfaces <> extensive" and review the output. See further details below. An example output is: show interfaces extensive | match policer Policer: Input: __default_arp_policer__ <<< incorrect if user ARP Policer was applied on an AE interface and the default ARP Policer is displayed Policer: Input: jtac-arp-ae5.317-inet-arp <<< correct if user ARP Policer was applied on an AE interface For all platforms, except SRX Series: This issue affects Juniper Networks Junos OS: All versions 5.6R1 and all later versions prior to 18.4 versions prior to 18.4R2-S9, 18.4R3-S9 with the exception of 15.1 versions 15.1R7-S10 and later versions; 19.4 versions prior to 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; This issue does not affect Juniper Networks Junos OS versions prior to 5.6R1. On SRX Series this issue affects Juniper Networks Junos OS: 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.4 versions prior to 19.4R3-S4; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. This issue does not affect 18.4 versions prior to 18.4R1 on SRX Series. This issue does not affect Junos OS Evolved.

This issue is not applicable to NFX NextGen Software. On NFX Series devices the use of Hard-coded Credentials in Juniper Networks Junos OS allows an attacker to take over any instance of an NFX deployment. This issue is only exploitable through administrative interfaces. This issue affects: Juniper Networks Junos OS versions prior to 19.1R1 on NFX Series. No other platforms besides NFX Series devices are affected.

A Use of Hard-coded Credentials vulnerability exists in the NFX250 Series for the vSRX Virtual Network Function (VNF) instance, which allows an attacker to take control of the vSRX VNF instance if they have the ability to access an administrative service (e.g. SSH) on the VNF, either locally, or through the network. This issue only affects the NFX250 Series vSRX VNF. No other products or platforms are affected. This issue is only applicable to environments where the vSRX VNF root password has not been configured. This issue affects the Juniper Networks NFX250 Network Services Platform vSRX VNF instance on versions prior to 19.2R1.

An Improper Input Validation weakness allows a malicious local attacker to elevate their permissions to take control of other portions of the NFX platform they should not be able to access, and execute commands outside their authorized scope of control. This leads to the attacker being able to take control of the entire system. This issue affects: Juniper Networks Junos OS versions prior to 18.2R1 on NFX Series.

An improper authorization weakness in Juniper Networks Junos OS allows a local authenticated attacker to bypass regular security controls to access the Junos Device Manager (JDM) application and take control of the system. This issue affects: Juniper Networks Junos OS versions prior to 18.2R1, 18.2X75-D5.

If REST API is enabled, the Junos OS login credentials are vulnerable to brute force attacks. The high default connection limit of the REST API may allow an attacker to brute-force passwords using advanced scripting techniques. Additionally, administrators who do not enforce a strong password policy can increase the likelihood of success from brute force attacks. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S3; 15.1X49 versions prior to 15.1X49-D160; 15.1X53 versions prior to 15.1X53-D236, 15.1X53-D495, 15.1X53-D591, 15.1X53-D69; 16.1 versions prior to 16.1R3-S10, 16.1R4-S12, 16.1R6-S6, 16.1R7-S3; 16.1X65 versions prior to 16.1X65-D49; 16.2 versions prior to 16.2R2-S7; 17.1 versions prior to 17.1R2-S10, 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R3-S1; 17.3 versions prior to 17.3R3-S2; 17.4 versions prior to 17.4R1-S6, 17.4R2-S2; 18.1 versions prior to 18.1R2-S4, 18.1R3-S1; 18.2 versions prior to 18.2R1-S5; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R1-S1.

When configuring a stateless firewall filter in Junos OS, terms named using the format "internal-n" (e.g. "internal-1", "internal-2", etc.) are silently ignored. No warning is issued during configuration, and the config is committed without error, but the filter criteria will match all packets leading to unexpected results. Affected releases are Juniper Networks Junos OS: All versions prior to and including 12.3; 14.1X53 versions prior to 14.1X53-D130, 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X49 versions prior to 15.1X49-D161, 15.1X49-D170; 15.1X53 versions prior to 15.1X53-D236, 15.1X53-D496, 15.1X53-D69; 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R3-S1; 17.3 versions prior to 17.3R3-S4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4; 18.2 versions prior to 18.2R1-S5, 18.2R2-S1; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3; 18.4 versions prior to 18.4R1-S1, 18.4R1-S2.

A firewall bypass vulnerability in the proxy ARP service of Juniper Networks Junos OS allows an attacker to cause a high CPU condition leading to a Denial of Service (DoS). This issue affects only IPv4. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D25 prior to 12.1X46-D71, 12.1X46-D73 on SRX Series; 12.3X48 versions prior to 12.3X48-D50 on SRX Series; 15.1X49 versions prior to 15.1X49-D75 on SRX Series.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

A vulnerability in the Network Address Translation - Protocol Translation (NAT-PT) feature of Junos OS on SRX series devices may allow a certain valid IPv6 packet to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition for the SRX device. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D72; 12.3X48 versions prior to 12.3X48-D55; 15.1X49 versions prior to 15.1X49-D90.

On Juniper Networks SRX Series Services Gateways chassis clusters running Junos OS 12.1X46 prior to 12.1X46-D65, 12.3X48 prior to 12.3X48-D40, 12.3X48 prior to 12.3X48-D60, flowd daemon on the primary node of an SRX Series chassis cluster may crash and restart when attempting to synchronize a multicast session created via crafted multicast packets.

PKId in Juniper Junos OS before 12.1X44-D52, 12.1X46 before 12.1X46-D37, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D20, 13.3 before 13.3R10, 14.1 before 14.1R8, 14.1X53 before 14.1X53-D40, 14.2 before 14.2R7, 15.1 before 15.1R4, 15.1X49 before 15.1X49-D20, 15.1X53 before 15.1X53-D60, and 16.1 before 16.1R1 allow remote attackers to bypass an intended certificate validation mechanism via a self-signed certificate with an Issuer name that matches a valid CA certificate enrolled in Junos.

J-Web in Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D25, 13.3 before 13.3R10, 13.3R9 before 13.3R9-S1, 14.1 before 14.1R7, 14.1X53 before 14.1X53-D35, 14.2 before 14.2R6, 15.1 before 15.1A2 or 15.1F4, 15.1X49 before 15.1X49-D30, and 15.1R before 15.1R3 might allow remote attackers to obtain sensitive information and consequently gain administrative privileges via unspecified vectors.

Juniper Junos OS before 12.1X46-D50, 12.1X47 before 12.1X47-D40, 12.3X48 before 12.3X48-D30, 13.3 before 13.3R9, 14.1 before 14.1R8, 14.1X53 before 14.1X53-D40, 14.2 before 14.2R6, 15.1 before 15.1F6 or 15.1R3, and 15.1X49 before 15.1X49-D40, when configured with a GRE or IPIP tunnel, allow remote attackers to cause a denial of service (kernel panic) via a crafted ICMP packet.

Juniper Junos OS before 13.3R9, 14.1R6 before 14.1R6-S1, and 14.1 before 14.1R7, when configured with VPLS routing-instances, allows remote attackers to obtain sensitive mbuf information by injecting a flood of Ethernet frames with IPv6 MAC addresses directly into a connected interface.

Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3X48 before 12.3X48-D30, 13.3 before 13.3R9-S1, 14.1 before 14.1R7, 14.2 before 14.2R6, 15.1 before 15.1F2-S5, 15.1F4 before 15.1F4-S2, 15.1R before 15.1R2-S3, 15.1 before 15.1R3, and 15.1X49 before 15.1X49-D40 allow remote attackers to cause a denial of service (kernel crash) via a crafted UDP packet destined to the interface IP address of a 64-bit OS device.

Juniper Junos OS before 12.1X46-D50 on SRX Series devices reverts to "safe mode" authentication and allows root CLI logins without a password after a failed upgrade to 12.1X46, which might allow local users to gain privileges by leveraging use of the "request system software" command with the "partition" option.

Juniper Junos OS before 13.2X51-D40, 14.x before 14.1X53-D30, and 15.x before 15.1X53-D20 on QFX5100 and QFX10002 switches do not have sufficient entropy, which makes it easier for remote attackers to defeat cryptographic encryption and authentication protection mechanisms via unspecified vectors.

Juniper Junos OS before 12.1X46-D45, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D25, 13.2 before 13.2R8, 13.3 before 13.3R7, 14.1 before 14.1R6, 14.2 before 14.2R4, 15.1 before 15.1R1 or 15.1F2, and 15.1X49 before 15.1X49-D15 allow local users to gain privileges via crafted combinations of CLI commands and arguments, a different vulnerability than CVE-2015-3003, CVE-2014-3816, and CVE-2014-0615.

The rpd daemon in Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D45, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D40, 13.3 before 13.3R6, 14.1 before 14.1R4, and 14.2 before 14.2R2, when configured with BGP-based L2VPN or VPLS, allows remote attackers to cause a denial of service (daemon restart) via a crafted L2VPN family BGP update.

Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R9, 13.2X51 before 13.2X51-D39, 13.3 before 13.3R8, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R4-S1, 15.1 before 15.1R2, 15.1X49 before 15.1X49-D30, and 16.1 before 16.1R1 allow remote attackers to cause a denial of service (socket consumption) via crafted TCP timestamps.

Race condition in the RPC functionality in Juniper Junos OS before 12.1X44-D55, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D39, 13.3 before 13.3R7, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R3-S4, 15.1 before 15.1F2, or 15.1R2, 15.1X49 before 15.1X49-D20, and 16.1 before 16.1R1 allows local users to read, delete, or modify arbitrary files via unspecified vectors.

Race condition in the Op command in Juniper Junos OS before 12.1X44-D55, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 12.3X50 before 12.3X50-D50, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D39, 13.2X52 before 13.2X52-D30, 13.3 before 13.3R7, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R4, 15.1 before 15.1F2 or 15.1R2, 15.1X49 before 15.1X49-D10 or 15.1X49-D20, and 16.1 before 16.1R1 allows remote authenticated users to gain privileges via the URL option.