Digium Asterisk 1.8.3 Rc1

An issue was discovered in res_pjsip_t38.c in Sangoma Asterisk through 13.x and Certified Asterisk through 13.21-x. If it receives a re-invite initiating T.38 faxing and has a port of 0 and no c line in the SDP, a NULL pointer dereference and crash will occur. This is different from CVE-2019-18940.

An issue was discovered in channels/chan_sip.c in Sangoma Asterisk 13.x, 16.x, and 17.x, and Certified Asterisk 13.21, because of an incomplete fix for CVE-2019-18351. A SIP request can be sent to Asterisk that can change a SIP peer's IP address. A REGISTER does not need to occur, and calls can be hijacked as a result. The only thing that needs to be known is the peer's name; authentication details such as passwords do not need to be known. This vulnerability is only exploitable when the nat option is set to the default, or auto_force_rport.

An issue was discovered in manager.c in Sangoma Asterisk through 13.x, 16.x, 17.x and Certified Asterisk 13.21 through 13.21-cert4. A remote authenticated Asterisk Manager Interface (AMI) user without system authorization could use a specially crafted Originate AMI request to execute arbitrary system commands.

main/translate.c in Sangoma Asterisk 13.28.0 and 16.5.0 allows a remote attacker to send a specific RTP packet during a call and cause a crash in a specific scenario.

res_pjsip_t38 in Sangoma Asterisk 13.21-cert4, 15.7.3, and 16.5.0 allows an attacker to trigger a crash by sending a declined stream in a response to a T.38 re-invite initiated by Asterisk.

An issue was discovered in Asterisk Open Source through 13.27.0, 14.x and 15.x through 15.7.2, and 16.x through 16.4.0, and Certified Asterisk through 13.21-cert3. A pointer dereference in chan_sip while handling SDP negotiation allows an attacker to crash Asterisk when handling an SDP answer to an outgoing T.38 re-invite. To exploit this vulnerability an attacker must cause the chan_sip module to send a T.38 re-invite request to them. Upon receipt, the attacker must send an SDP answer containing both a T.38 UDPTL stream and another media stream containing only a codec (which is not permitted according to the chan_sip configuration).

Buffer overflow in res_pjsip_messaging in Digium Asterisk versions 13.21-cert3, 13.27.0, 15.7.2, 16.4.0 and earlier allows remote authenticated users to crash Asterisk by sending a specially crafted SIP MESSAGE message.

An Integer Signedness issue (for a return code) in the res_pjsip_sdp_rtp module in Digium Asterisk versions 15.7.1 and earlier and 16.1.1 and earlier allows remote authenticated users to crash Asterisk via a specially crafted SDP protocol violation.

There is a stack consumption vulnerability in the res_http_websocket.so module of Asterisk through 13.23.0, 14.7.x through 14.7.7, and 15.x through 15.6.0 and Certified Asterisk through 13.21-cert2. It allows an attacker to crash Asterisk via a specially crafted HTTP request to upgrade the connection to a websocket.

An issue was discovered in Asterisk Open Source 13.x before 13.21.1, 14.x before 14.7.7, and 15.x before 15.4.1 and Certified Asterisk 13.18-cert before 13.18-cert4 and 13.21-cert before 13.21-cert2. When endpoint specific ACL rules block a SIP request, they respond with a 403 forbidden. However, if an endpoint is not identified, then a 401 unauthorized response is sent. This vulnerability just discloses which requests hit a defined endpoint. The ACL rules cannot be bypassed to gain access to the disclosed endpoints.

An issue was discovered in Asterisk through 13.19.1, 14.x through 14.7.5, and 15.x through 15.2.1, and Certified Asterisk through 13.18-cert2. res_pjsip allows remote authenticated users to crash Asterisk (segmentation fault) by sending a number of SIP INVITE messages on a TCP or TLS connection and then suddenly closing the connection.

A NULL pointer access issue was discovered in Asterisk 15.x through 15.2.1. The RTP support in Asterisk maintains its own registry of dynamic codecs and desired payload numbers. While an SDP negotiation may result in a codec using a different payload number, these desired ones are still stored internally. When an RTP packet was received, this registry would be consulted if the payload number was not found in the negotiated SDP. This registry was incorrectly consulted for all packets, even those which are dynamic. If the payload number resulted in a codec of a different type than the RTP stream (for example, the payload number resulted in a video codec but the stream carried audio), a crash could occur if no stream of that type had been negotiated. This was due to the code incorrectly assuming that a stream of that type would always exist.

A Buffer Overflow issue was discovered in Asterisk through 13.19.1, 14.x through 14.7.5, and 15.x through 15.2.1, and Certified Asterisk through 13.18-cert2. When processing a SUBSCRIBE request, the res_pjsip_pubsub module stores the accepted formats present in the Accept headers of the request. This code did not limit the number of headers it processed, despite having a fixed limit of 32. If more than 32 Accept headers were present, the code would write outside of its memory and cause a crash.

An issue was discovered in Asterisk 13.18.4 and older, 14.7.4 and older, 15.1.4 and older, and 13.18-cert1 and older. A select set of SIP messages create a dialog in Asterisk. Those SIP messages must contain a contact header. For those messages, if the header was not present and the PJSIP channel driver was used, Asterisk would crash. The severity of this vulnerability is somewhat mitigated if authentication is enabled. If authentication is enabled, a user would have to first be authorized before reaching the crash point.

A Remote Crash issue was discovered in Asterisk Open Source 13.x before 13.18.4, 14.x before 14.7.4, and 15.x before 15.1.4 and Certified Asterisk before 13.13-cert9. Certain compound RTCP packets cause a crash in the RTCP Stack.

An issue was discovered in chan_skinny.c in Asterisk Open Source 13.18.2 and older, 14.7.2 and older, and 15.1.2 and older, and Certified Asterisk 13.13-cert7 and older. If the chan_skinny (aka SCCP protocol) channel driver is flooded with certain requests, it can cause the asterisk process to use excessive amounts of virtual memory, eventually causing asterisk to stop processing requests of any kind.

An issue was discovered in Asterisk Open Source 13 before 13.18.1, 14 before 14.7.1, and 15 before 15.1.1 and Certified Asterisk 13.13 before 13.13-cert7. A memory leak occurs when an Asterisk pjsip session object is created and that call gets rejected before the session itself is fully established. When this happens the session object never gets destroyed. Eventually Asterisk can run out of memory and crash.

A Buffer Overflow issue was discovered in Asterisk Open Source 13 before 13.18.1, 14 before 14.7.1, and 15 before 15.1.1 and Certified Asterisk 13.13 before 13.13-cert7. No size checking is done when setting the user field for Party B on a CDR. Thus, it is possible for someone to use an arbitrarily large string and write past the end of the user field storage buffer. NOTE: this is different from CVE-2017-7617, which was only about the Party A buffer.

chan_sip in Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3, when the timert1 sip.conf configuration is set to a value greater than 1245, allows remote attackers to cause a denial of service (file descriptor consumption) via vectors related to large retransmit timeout values.

Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3 allow remote authenticated users to cause a denial of service (uninitialized pointer dereference and crash) via a zero length error correcting redundancy packet for a UDPTL FAX packet that is lost.

Asterisk Open Source 1.8 before 1.8.32.3, 11.x before 11.17.1, 12.x before 12.8.2, and 13.x before 13.3.2 and Certified Asterisk 1.8.28 before 1.8.28-cert5, 11.6 before 11.6-cert11, and 13.1 before 13.1-cert2, when registering a SIP TLS device, does not properly handle a null byte in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority.

The DB dialplan function in Asterisk Open Source 1.8.x before 1.8.32, 11.x before 11.1.4.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8 before 1.8.28-cert8 and 11.6 before 11.6-cert8 allows remote authenticated users to gain privileges via a call from an external protocol, as demonstrated by the AMI protocol.

ConfBridge in Asterisk 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 11.6 before 11.6-cert8 allows remote authenticated users to (1) gain privileges via vectors related to an external protocol to the CONFBRIDGE dialplan function or (2) execute arbitrary system commands via a crafted ConfbridgeStartRecord AMI action.

Use-after-free vulnerability in the PJSIP channel driver in Asterisk Open Source 12.x before 12.7.1 and 13.x before 13.0.1, when using the res_pjsip_refer module, allows remote attackers to cause a denial of service (crash) via an in-dialog INVITE with Replaces message, which triggers the channel to be hung up.

Race condition in the chan_pjsip channel driver in Asterisk Open Source 12.x before 12.7.1 and 13.x before 13.0.1 allows remote attackers to cause a denial of service (assertion failure and crash) via a cancel request for a SIP session with a queued action to (1) answer a session or (2) send ringing.